iRock-1S/2S/1ST Small Rockwell Hardness Tester

●Test the superficial hardness of metals.

●The test principle and accuracy comply to standard lS06508.

●With the bench stand it can be used on the desk as well as onsite.

●Tests the hardness of thin plates, slim tubes, thin shafts, small balls and small stampings, workpieces with small supporting surface as well as parts requiring small indentation, replacing Vickers hardness tester.

●It is used for finished workpiece non-destructive hardness test directly. The small indentation is acceptable to most workpieces.

●Traceable standard hardness block.

●Indenter inspected with standard Rockwell hardness tester.

●Test force calibrated with load cells directly traceable to national secondary benchmark.

Availability:

Quantity:



Inquire Add to Basket

Product Description

Product Description

Initial Test Force	3 kgf
Total Test Force	15 kgf, 30 kgf, 45 kgf
Test Head	120°Diamond Indenter; 1/16" carbide ball
Accuracy	Complying with IS0 6508,ASTM E18
Resolution	0.5 HR
Opening Size (iRock-1S)	W x D 25*25 mm
Opening Size (iRock-2S)	W x D 50*50 mm
Opening Size (iRock-1ST)	Dia >4.8 mm
Testing Range	HRN,HRT,HRW,HRX,HRY,etc.15 scales
Application	All metals including iron, steel copper, aluminium, zinc, lead, tin, carburized steel,nitrided steel etc.

	Items
Standard Configurations	Tester
	Bench Stand
	120° Diamond Indenter
	1/16" carbide ball indenter
	3 superficial Rockwell test blocks
	1 HR15T test block only(iRock-1ST)
	Flat anvil
	V anvil
	Extensions
	Flat adapter (iRock-1ST)
	Carrying case
Optional Configurations	120°Diamond Indenter
	Carbide ball indenter(1/16", 1/8")
	Steel ball indenter(1/4", 1/2")
	Standard test blocks(HR15T, HR3ON, HR30T)
	Raised spot anvil
	Slim raised spot anvil (flat top: Ф1.5 mm, Ф2.5 mm, Ф3.5 mm)
	Diamond raised spot anvil
	Ball testing anvil
	Spare magnifier