- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
●It applies Brinell hardness test method, with static screw or dynamic hammer impact loading test force, through a calibrated shear pin to control the force precisely.
●Good force value consistency, no influence by operator.
●Test force F=1580 kgf, diameter of test ball D=7.26 mm, which leads F/D² =30. It follows Brinell similarity principle, equals to normal condition of 3,000 kgf, 10 mm test ball.
●Good repeatability and high accuracy. The accuracy is the same as desk tester.
●Simple and flexible operation. Middle or small parts could apply static force loading, and large part could apply hammer impact.
●Only consume 1 piece of cheap shear pin for each test.
●It could replace Leeb hardness tester in low accuracy and reliability.
| Quantity: | |
|---|---|
Product Description
Test Force | 1,580 kgf |
Indenter | 7.26 mm Steel Indenter, test range 100~350 HBW |
4 mm Carbide Alloy Indenter, test range 350~650 HBW | |
Indicator Error | Static type ≤2~3 % Comply with ISO, ASTM |
Hammer Impact Type≤5% | |
Repeatability Error | Static type ≤2~3% Comply with ISO, ASTM |
Hammer Impact Type≤5% | |
Test Range | 100~650 HBW |
Opening Dimension | 150 mm(Height) x100 mm(Depth) |
Net Weight | 4.2 kg |
Application | Castings, Forgings, Steel Products, Heat Treatment |
Items | |
Standard Configurations | Tester |
7.26 mm Steel Indenter | |
Indenter Holder | |
Flat Anvil | |
V-shape Anvil | |
Impact Cylinder | |
Holding Handle | |
Brinell Hardness Block (HB10/3000) | |
Pin (250 pieces/box) | |
Pin Removal Tool | |
20X Reading Microscope | |
Rubber Protective Cover | |
Carrying Case | |
Optional Configurations | 7.26 mm Steel Indenter |
4 mm Carbide Alloy Indenter | |
Pin (250 pieces/box) | |
Brinell Hardness Block (HB10/3000) | |
Sphere Spot Anvil (for pipe or curved plate) | |
Small Flat Anvil (for small parts) | |
20X Reading Microscope | |
40X Reading Microscope | |
Brinell Indentation Measurement System |
