iBarcol-934/935/936 Barcol Hardness Tester

●Easy to Use: Single hand operation; easy to use; high efficiency; able to make test at any site.

●High Sensitivity: Barcol Impressor has 100 graduations. Its sensitivity is much higher than the Webster hardness tester.

●Wide Testing Range: Used to test from very soft pure aluminum to very hard aluminum alloys.

●Less Thickness Requirement: It can test on any workpieces with thickness greater than 0.8 mm.

●No Supporting Required: It can test from only one side of the workpiece. It is unnecessary to move or support the workpiece. It is used to test very large and thick worpieces and assembly parts.

●Easy Conversion: The test results can be converted to HB, HR, HV and HW easily through the conversion table.

●High Quality Indenter: The indenter has very high hardness, long service life and good interchangeability.

Availability:

Quantity:



Inquire Add to Basket

Product Description

Product Description

Testing Range		0 - 100 HBa (equivalent to 25 - 135 HBW)
Resolution		0.5 HBa
Indication Error		±2 HBa (42 ~ 48 HBa)
		±1 HBa (81 ~ 88 HBa)
Repeatability Error		±2 HBa (42 ~ 48 HBa)
		±1 HBa (81 ~ 88 HBa)
Weight		0.5 kg
Application	iBarcol-934	Mainly applied to test aluminum and aluminum alloys. It is suitable to test pure aluminum, aluminum alloys, thick pieces of aluminum sheets, thick pieces, bars and assembled aluminum alloys parts (e.g. aluminum alloy doors, windows and ladders); also used to test fiber reinforced plastics and hard plastics with ASTM D2583
	iBarcol-935	Used to test soft plastics, lead, tin and other soft Metals
	iBarcol-936	Used to test rubber, wood and leather etc.

	Items
Standard Configurations	Tester
	2 Spare Indenters
	Standard Hardness Block (high)
	Standard Hardness Block (low)
	Calibration Wrench
	Leg
	Carrying Case
Optional Configurations	Spare Indenters
	Standard Hardness Block (high / low)
	Dial Glass
	Flat Leg