Views: 0 Author: Site Editor Publish Time: 2025-03-12 Origin: Site
Hey, everyone! Today, I'm going to take you through the operation method of the amazing iPoli-1D-200M Metallographic Manual Grinding Polishing Machine in detail. This is a great piece of equipment produced by Mikrosize. In the field of metallographic sample preparation, this machine can definitely bring about earth-shaking changes.
First of all, let's talk about the preparatory work. When you receive the iPoli-1D-200M sent by Mikrosize, be sure to unpack it carefully. Check whether all components are complete, including the grinding disc, polishing disc, motor assembly, and any accompanying accessories. Place the machine on a stable and flat surface. This is extremely important because the machine should not shake during operation, otherwise, it will affect the results.
Next, we officially enter the operation stage. The iPoli-1D-200M is designed very user-friendly, and even beginners who have just started working in metallography can easily get the hang of it. When starting the grinding process, you need to select the right grinding disc. Mikrosize provides a series of grinding discs of different specifications, which are suitable for various materials and different degrees of rough surface treatment. For example, if you are processing a soft metal, you may need to choose a coarse-grit grinding disc, which can quickly remove large defects on the surface of the material.
Install the selected grinding disc on the grinding platform. The installation process of the iPoli-1D-200M is simple and firm. After installing the grinding disc, start the machine. This machine from Mikrosize has a powerful motor, which runs quietly and can continuously and stably provide the rotational speed required for grinding.
Pick up your metal sample and press it firmly on the rotating grinding disc. Note that the force should be even and steady. Don't press too hard, otherwise, you may damage the sample or the grinding disc. Make the sample move in a circular motion on the grinding disc, so that the entire surface of the sample can be evenly ground. Keep grinding until the surface roughness of the sample is reduced to the desired level.
After the grinding is completed, it's time to enter the polishing stage. Replace the grinding disc with a polishing pad. The polishing pads provided by Mikrosize are of excellent quality and can make the surface of the sample present a mirror-like effect. Apply some polishing agent on the polishing pad. Depending on the material of the sample, there are various polishing agents available for selection.
Start the machine again, and then gently place the already ground sample on the rotating polishing pad. Just like during the grinding process, make the sample move in a circular motion, but this time the pressure should be lighter. During the polishing process, you will see that the surface of the sample gradually becomes smoother and shinier. Keep an eye on the state of the sample, and when it reaches the ideal polishing effect, you're done!
The iPoli-1D-200M Metallographic Manual Grinding Polishing Machine from Mikrosize is definitely a top-notch piece of equipment. It has made the originally complex process of metallographic sample preparation easy and efficient. Whether you are a professional metallurgist or a student who has just stepped into this field, this machine can surely meet your needs and even exceed your expectations. So, don't hesitate. Try it out and experience its amazing effects for yourself!