iPress-2HA Auto Metallographic Mounting Press(Hydraulic Pressure)

Product Feature：

●After being embedded by this machine, it is convenient to grind and polish the sample, which is beneficial to observe the material structure of the sample under the metallographic microscope and test the hardness of the sample on the hardness tester.
●The inlay material of this machine is limited to thermosetting materials. The pressing temperature of different thermosetting materials can be adjusted and customized according to the material.
●This machine can automatically heat and pressurize. After pressing and forming, it will cool down and stop automatically. Open the upper cover and press the rising key to automatically raise the sample to take parts.
●This machine is a multi-functional water-cooled inlay machine for various samples. It has the advantages of large number of molds and short molding time within 6min.

Product Application：

iPress-4A The hot mounting machine is used for inlaying small, difficult to hold or irregular metallographic and petrographic samples before grinding and polishing.

Availability:

Quantity:



Inquire Add to Basket

Product Description

Product Description

Technical Parameter：

Product Name	iPress-2HA
Sample pressing diameter	ф22mm ф30mm、ф45mm（choose any one）
Heater	220V 1600W（ф22mm ф30mm）/2000W （ф45mm）
Sample preparation pressure	0-10MPa
Heating temperature range	35~300℃
Sample preparation time	About 6min
Cooling mode	Water cooling
Overall dimension	435610430mm
Packing size	715530585mm
Net weight	52kg
Gross weight	64kg

Packing List：

Main machine	iPress-2HA	SET	1
Thermocouple		PCS	1
Plastic spoon		PCS	1
Product manual		SHARE	1
Product certificate		SHARE	1
Inlet, drain pipe		PCS	1 ea.
Hexagon wrench （M4）		PCS	1
Pipe hoop		PCS	2
Fuse	5*20 15A	PCS	1
Filter net		PCS	1