Views: 0 Author: Site Editor Publish Time: 2025-01-23 Origin: Site
Dear friends, today let's talk about the operation of the iStereo - 165D stereo microscope. This is a quite practical tool in fields such as scientific research, education, and industrial inspection. First of all, before starting the operation, make preparations. Place the microscope on a stable, clean, and well-lit workbench, ensuring there is not too much vibration and interference around. Check whether all components of the microscope are in good condition, such as the eyepieces, objectives, adjustment knobs, etc. If any damage or abnormality is found, never use it rashly and contact a professional in time for handling. Next is the power connection. Insert the power cord plug of the microscope firmly into a suitable power outlet. When turning on the power switch, do it gently, and then observe the indicator light on the microscope to confirm that the power has been properly connected. Now, let's look at the adjustment of the eyepieces. Adjust the diopter of the eyepieces according to your personal vision. First, close one eye, observe through the eyepiece with the other eye, and turn the adjustment ring on the eyepiece at the same time until the image in the field of view reaches the clearest state. Then switch to the other eye and repeat the same operation to make both eyes adapt to the observation state of the microscope. After adjusting the objectives, you can place the sample. Use tweezers to carefully place the sample on the stage, ensuring that the sample is at the center of the stage. If the sample needs to be fixed, use a suitable fixture to fix it firmly to prevent it from moving during the observation process. Then, perform the focus adjustment. Turn the coarse adjustment knob to make the objective slowly approach the sample, but always pay attention to the observation. Never let the objective touch the sample, otherwise, it may damage the objective or the sample. When you feel that you are almost close to the clear focus, turn the fine adjustment knob for fine adjustment until a clear and sharp sample image is seen in the eyepiece. During the observation process, you can also adjust the brightness of the microscope's light source as needed. By adjusting the light source brightness knob, make the details of the sample more clearly displayed. If you want to observe the sample from different angles, you can gently rotate the stage to observe from multiple angles. After the operation is completed, turn off the power switch and carefully remove the sample. Wipe the eyepieces, objectives, and stage of the microscope with a clean and soft cloth to keep the microscope clean. Finally, place the microscope properly in a safe place to avoid collision and damage. The operation of the iStereo - 165D stereo microscope is not complicated. As long as you follow the correct steps, you can give full play to its role and help us explore the mysteries of the microscopic world. If you have any questions during the operation process, you can feel free to ask me, and we will provide professionals to answer them for you. |