Cyclic Corrosion Test Chamber

Model

ASR-FH-90D

ASR-FH-120D

ASR-FH-160D

ASR-FH-200D

Internal 

Dim. (mm)

( W * D * H)

900x600x500

1200x1000x500

1600x1000x500

2000x1000x500

External Dim. (mm)

( W * D * H)

2450x1553x

1430

2830x1560x

1830

3230x1560x1830

3630x1560x

1930

Temperature Range

10℃-70℃

Humidity Range

30%~90%

Temperature and Humidity Analysis Precision/Uniformity

0.1℃;0.1R.H./+1.0℃；+3.0%R.H.

Temperature and Humidity Analysis Accuracy/Fluctuation

+0.1℃；+2.0R.H./+0.5℃℃；+2.0%R.H.

Laboratory Temperature

Saltwater test method（NSSA CSS)35℃+1℃

Corrosion Resistance Test Method(CASS)50℃±0.1℃

Pressure Tank Temperature

Saltwater test method（NSSACSS)47℃+1℃

Corrosion Resistance Test Method(CASS)63℃℃±0.1℃

Saltwater Temperature

35℃+1℃ or 50℃+1℃

Saltwater Concentration

The concentration of sodium chloride solution is 5% or 0.26 grams of copper chloride is added per liter of sodium chloride solution with a concentration of 5%.

Compressed Air Pressure

1.00+0.01kgf/cm

Spray Volume

10~2.0ml/80cm²/h(The standard requires 16 hours of testing for an average quantity)

PH Value

6.5~7.23.0~3.2

Spray Method

Using Bernoulli's principle to absorb brine and then atomize it.

Power Supply

380V 6KW 50HZ  MAX 30A

Salt Spray Test

Salt Spray Test

(1) Laboratory: 10℃～60℃ (non-linear)

(2)Saturated air barrel：47℃ ±1℃

Wetting Test

(1) Temperature： 49℃ ±2℃

(2) Humidity： 30%~95% ±3%

(3)Saturated air barrel：47℃ ±1℃

Drying Test

(1)Temperature： 10℃~65℃ ±0.5℃

(2) Humidity：More than 93%

Circuit Control System

1.The main controller is equipped with a 7-inch LCD human-machine interface, and the main screen can be planned out with the test procedure.

2.Fixed conditions can set time: 0 - 999 H 59 MIN。

3.Program mode can set salt spray and humidity test at the same time

4.Equipped with power-off memory device, the remaining program can be continued when power is restored.

5.The temperature rise and fall can be controlled at a rate, and has the function of self-correcting the temperature and humidity reference points.

6. The temperature and humidity sensor uses a DIN PT-100Ω (platinum sensing).

Air Supply System

The air pressure is 1kg/cm2 and is adjusted in two stages. The first is the imported pressure regulating filter with water filtering function, which is roughly adjusted to 2-2.5kg/cm2. The second is the imported precision pressure regulating valve, which is adjusted to the pressure gauge 1kg/cm2.

Inlet Drainage System

The system is equipped with an automatic water replenishment feature that adds water when the level is too low, and manual water addition is also available.

Humidification System

1. Adopts electronic bit P.I.D micro-motion humidification system.

2. With overheating and overflow dual protection device

3. The humidification and dehumidification systems are completely independent.

4. Water level control using high molecular float ball valves.

5.Automatic Humidifier Water Refill Device. (Machine needs to be connected to a water source.)

Heating System

1.It adopts external hot air heating method, which heats up quickly, reduces standby time, and has a low component damage rate.

2.Use S.S.R to control heating power, accurate temperature and low power consumption.

Dehumidification System

1.The refrigeration evaporator condensation dehumidification method is adopted to ensure stable humidity.

2.Bubble accelerated humidifier, humidity stabilization rate is fast.

3.Adopts a high-speed return air suction system.

Safety Protection Device

1.Equipped with leakage circuit breaker without fuse protection.

2.Low water level protection switch.

3.Low-salt solution protection switch

4. Dual overheat protection device, preventing mechanical or electronic actions from running out of control.

5. Fault point Chinese indication screen.

Using Environment

Performance guaranteed environmental temperature range:＋5℃～＋30℃（Except for the minimum attainable temperature, maximum thermal load capacity and cooling time）

Shelf

6 pcs

Standard Measuring Cylinder

2 pcs

Glass Filter

2 pcs

Collector 80cm2

2 pcs

Glass Nozzle

2 pcs

Sodium Chloride (NACL) 500 g

2 bottles

Instruction Manual

1 copy

Product Certificate

1 copy

Warranty Card

1 copy